1)Introduction

Corrugated Pale, or Palisade fencing presents a formidable barrier and is often specified where there is a need for high security.

The forbidding appearance and inherent strength of the pales provide an effective deterrent to would be intruders. It is available in a choice of head styles, both in the traditional 'D' pale
profile, and 'W' section pale for added security.

Palisade is offered in a range of heights up to 3.6 metres, and is self-adjusting to slopes of up
to 1 in 3. It can be supplied assembled in panels, or bundled for site assembly along with either bolts or rivets.

Palisade is available in a range of finishes, galvanized in, or galvanized and colour coated in various colours to blend with the environment.

 

2)Construction

A standard panel is constructed from hot and cold rolled steel sections supplied for assembly on site. Panels consist of 17 vertical pales manufactured in "D" or "W" profile with a choice of tops. The pales are fixed to rolled steel angle horizontals which are supported by 102 x 44 joist posts.

 

A fish plate passes through a slot in the post and secures the horizontal rail captive in its
position. The pales are connected to the horizontals to form the panel and are held securely together by utilising vandal resistant security fasteners.

 

3)Specification

A choice of "D" or "W" section is offered with a variety of heads and thicknesses chosen by the risk assessment for a particular site.

STANDARD HEIGHT	PALE SECTION	HEAD PROFILE
1.2M	3.0MM"D"	ROUNDED & NOTCHED
1.5M	3.0MM"D"	ROUNDED & NOTCHED
1.8M	3.0MM"D"	ROUNDED & NOTCHED
1.8M	3.0MM"D"	TRIPLE POINTED
1.8M	2.0MM"W"	TRIPLE POINTED
2.0M	2.0MM"D"	ROUNDED & NOTCHED
2.0M	3.0MM"D"	TRIPLE POINTED
2.0M	2.0MM"W"	TRIPLE POINTED
2.1M	3.0MM"D"	TRIPLE POINTED
2.1M	2.0MM"W"	TRIPLE POINTED
2.4M	2.0MM"D"	TRIPLE POINTED
2.4M	3.0MM"D"	ROUNDED & NOTCHED
2.4M	2.0MM"W"	TRIPLE POINTED
2.4M	2.5MM"W"	TRIPLE POINTED
3.0M	3.0MM"D"	TRIPLE POINTED